Removing The Fixing Unit - Canon iR2020 Series Service Manual

Chapter 9
[1]
3) Lift the left door with both hands to release it from the door rotation shaft
[1], and then remove the left door.
[1]

9.4.2.5 Removing the Fixing Unit

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the inner cover [2] at the
upper front.
9-6
F-9-22
F-9-23
2) Remove the screw [1], and then detach the heater harness cover [2].
Disconnect the connector [3].
[2]
[3]
[1]
3) Disconnect the two connectors [1], and then release the fixing unit harness
from the wire saddle [2].
4) Raise the delivery upper guide [1]. Remove the three screws [2], and then
0011-0613
remove the fixing unit [3].
[2]
F-9-24
F-9-25
[1]
F-9-26
[1]
[3] [2]
F-9-27
[1]
[2]
[1]
[2]