Installing The Heater Pcb; Unpacking And Checking The Contents; Preparing The Host Machine - Canon iR2020 Series Service Manual

2.5 Installing the Heater PCB

2.5.1 Unpacking and Checking the Contents

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Prepare the following parts.

2.5.2 Preparing the Host Machine

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing, make sure the host machine is turned off. If it is turned on, go through the following:
1. Turn off the main power switch.
2. Disconnect the power cable (from the power outlet).
3. Disconnect the power cable.
1) Open the front cover [1].
[1] [2]
[5] [6]
[1] Heater PCB unit
[2] Heater switch harness
[3] Cassette heater harness
[4] Heater PCB harness
[5] Clamp
[6] Edge saddle (small)
[7] Edge saddle (large)
[8] P screw (M3x8)
[3] [4]
[7]
F-2-56
1 pc.
1 pc.
1 pc.
1 pc.
4 pcs.
2 pcs.
1 pc.
2 pcs.
F-2-57
[8]
Chapter 2
0011-3362
0011-3363
2-17