Download (Download); Download; Initialization Of Set Value (Clear); Clear - Canon iR2020 Series Service Manual

Chapter 14
#PRINT>#PRINT NUMERIC
031
032
033
034
035
036
037
038
039
#SCAN>#SCAN NUMERIC
body No:BFDxxxxx

14.12 Download (DOWNLOAD)

14.12.1 Download

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading"
section):
Main unit
- Flash ROM (system + boot) mounted on the image processor PCB
Accessory
- ROM mounted on the finisher controller PCB
- ROM mounted on the PCL board

14.13 Initialization of Set Value (CLEAR)

14.13.1 Clear

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Group
TEL & USER DATA
SERVICE DATA
COUNTER
TYPE
SOFT-CNT
HST
CARD
ERR
PWD
ALL

14.14 Display of ROM Information (ROM)

14.14.1 ROM display

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
The table below lists the items of ROM display mode that are supported.
Item
MAIN
14-32
FACTORY 1 2
50
50
50
100
100
100
100
100
100
Item
Clears all user-registered and -set areas of telephone registration data and user data.
(Telephone registration refers to the registration of codes on one-touch dialing,
abbreviated dialing, and group dialing.)
Clears the system dump list, except for counters and clear dates.
Clears the maintenance counter, parts counter and mode-specific counters.
Initializes the counter (numerator) in the system dump list.
Initializes user data and service data to suit specified destination settings.
Not used
ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
Clears department management information held in the controller before the card
reader is demounted.
E355 Not used
E719 Clears card reader errors.
Clears the system administrator's password.
Clears user and service data (except for some scan parameters and print parameters),
and the counter setting/registration data in the system dump list, except for the print
count.
Explanation
Displays the version number of the ROM (SYSTEM) mounted on the image
processor PCB.
#SCAN>#SCAN NUMERIC
3 FACTORY 1
026
031
032
033
034
041
042
043
044
045
046
047
048
054
213
214
215
F-14-8
Explanation
T-14-26
2 3
0011-0992
0011-0999
0011-0988