Removing The Fixing Unit - Canon iR2020 Series Service Manual

Chapter 8
[1]
3) Lift the left door with both hands to release it from the door rotation shaft
[1], and then remove the left door.
[1]

8.4.3.5 Removing the Fixing Unit

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the inner cover [2] at the
upper front.
8-14
F-8-49
F-8-50
2) Remove the screw [1], and then detach the heater harness cover [2].
Disconnect the connector [3].
[2]
[3]
[1]
3) Disconnect the two connectors [1], and then release the fixing unit harness
from the wire saddle [2].
4) Raise the delivery upper guide [1]. Remove the three screws [2], and then
0010-9927
remove the fixing unit [3].
[2]
F-8-51
F-8-52
[1]
F-8-53
[1]
[3] [2]
F-8-54
[1]
[2]
[1]
[2]