Chapter 8
[1]
8.4.2.5 Removing the Fixing Unit
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the inner cover [2] at the
upper front.
2) Remove the screw [1], and then detach the heater harness cover [2].
Disconnect the connector [3].
[2]
[3]
[1]
3) Disconnect the two connectors [1], and then release the fixing unit harness
from the wire saddle [2].
8-10
F-8-21
[1]
[2]
[1]
F-8-22
F-8-23
4) Raise the delivery upper guide [1]. Remove the three screws [2], and then
remove the fixing unit [3].
0010-9940
[2]
8.4.2.6 Removing the Fixing Film Unit
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Release the hooks [1], and then remove the spur unit [2] by sliding it.
2) Remove the resin ring [1], and then remove the fixing pressure release
lever [2].
[1]
F-8-24
[1]
[3]
[2]
F-8-25
[1]
[2]
F-8-26
[2]
[1]
F-8-27
[2]
0010-9941