Outline; Overview Of Upgrade; Overview Of Service Support Tool; Making Preparations - Canon iR2020 Series Service Manual

15.1 Outline

15.1.1 Overview of Upgrade

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
This machine and options can be upgraded by downloading system software programs from the personal computer (hereafter called as the PC) in which a service
support tool (hereafter called SST) has been loaded.
System software programs and upgrade tools are listed in the following table:

15.1.2 Overview of Service Support Tool

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
When using the SST, select "#DOWNLOAD" in the service mode to place the main unit in the download mode. (The finisher need not enter the download mode.)

15.2 Making Preparations

15.2.1 Registering the System Software

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
System software programs to be downloaded need to be registered in the SST.
The system software programs are registered with the names listed below.
<Software Programs Preinstalled in Main Unit>
Machine name:iR2020
Unit name:
- Main controller: System
- Boot program: Boot
- PCL board: PCL
The system software registration program is explained below taking System as an example.
[Preparation]
Have the following ready:
- PC in which SSTv3.21 or later is installed
- System CD supplied with iR2020
[System Software Registration Procedure]
1) Start the PC.
2) Insert the system CD in the PC.
Type System software type
Main unit System (main controller)
Boot (boot program)
Option PCL (PCL printer kit-J1)
Fin_U1 (Finisher-U1)
Main unit
Image processor PCB
Flash ROM
PCL printer kit-J1
32MB ROM PCB
Flash ROM
Finisher-U1
Finisher controller PCB
Flash ROM
CPU
T-15-1
Upgrade tool Remarks
SST
Yes
Yes
Yes
Yes
USB cable
CPU
J303
RS232C
straight cable
Downloader
PCB
FY9-2034
J918
F-15-1
The main controller also controls
the reader.
Dedicated service tool
(Downloader PCB: FY9-2034)
PC
SST
System
software
Chapter 15
0011-1809
0011-1810
0011-1866
15-1