Removing The Reader Front Cover; Removing The Reader Heater (Right); Removing The Reader; Removing The Adf Reading Glass - Canon iR2020 Series Service Manual

[3]
When removing the copyboard glass, take care not to touch the
following:
- Glass surface
- Standard white plate
Dirt on these parts can show up as white/black lines in the image. If dirt is
found, remove it with lint-free paper moistened with alcohol.

4.4.8.2 Removing the Reader Heater (Right)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the screw [1], and then detach the heater cover [2].
[1]
[2]
F-4-96
F-4-97
F-4-98
2) Remove the screw [1].
3) Disconnect the connector [2], disconnect the harness from the wire saddle
[3], and then remove the reader heater (right) [4].

4.4.8.3 Removing the Reader Front Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the two screws [1], and then detach the reader front cover [2].

4.4.8.4 Removing the ADF Reading Glass

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the two screws [1], and then remove the glass retainer [2].
3) Remove the ADF reading glass [3].
0010-4319
[2] [1]
F-4-99
[4] [2] [3]
F-4-100
[1]
[2]
F-4-101
Chapter 4
[1]
0010-6118
0010-6120
4-25