Fixing Driver Motor; Removing The Rear Cover; Removing The Left Cover (Rear); Removing The Ram Cover - Canon iR2020 Series Service Manual

[1]

9.4.11 Fixing Driver Motor

9.4.11.1 Removing the Rear Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].

9.4.11.2 Removing the Left Cover (Rear)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
[2]
[1]

9.4.11.3 Removing the RAM Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the RAM cover [2].
[3]
[2]
F-9-79
[1]
[2]
[1]
F-9-80
F-9-81
[1]

9.4.11.4 Removing the SDRAM

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Release two lock levers [1] in the direction of arrow [A] and remove
SDRAM [2].
0011-0406

9.4.11.5 Removing the LAN Cover

iR2016 / iR2020 / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the LAN cover [2].
0011-0407

9.4.11.6 Removing the IP Cover

iR2016 / iR2020 / iR2016i / iR2020i
0011-0621
1) Remove a connector [1] of IP-LAN cable and a cable clamp [2].
[2]
F-9-82
[A]
[A]
[1] [2]
F-9-83
[2]
[1]
F-9-84
Chapter 9
0011-0622
0011-0623
[1]
0011-0624
9-15