[2]
[5]
[2]
10) Remove he two screws [1], and then remove the flexible cable guide [2].
11) Remove the reader controller PCB [3] together with the mount.
[3]
12) Remove the three screws [1], and remove the reader controller PCB [2]
from the mount.
4.4.3 Scanner Motor
4.4.3.1 Removing the Rear Cover
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
[1]
[2]
[5]
[1]
[4]
[3]
F-4-48
[2]
[1]
F-4-49
[2]
[1]
F-4-50
4.4.3.2 Removing the Right Cover (Lower)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
[1]
4.4.3.3 Removing the Right Cover (Upper)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the screw [1], and then detach the right cover (upper).
4.4.3.4 Removing the Left Cover (Rear)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
0010-6095
Chapter 4
[1]
[2]
[1]
F-4-51
[3]
[2]
F-4-52
[1]
[2]
F-4-53
0010-6096
0010-6097
0010-6098
4-17