Removing The Right Cover (Lower); Removing The Right Cover (Upper); Removing The Left Cover (Rear); Removing The Reader Rear Cover - Canon iR2020 Series Service Manual

4.4.5.2 Removing the Right Cover (Lower)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
[1]

4.4.5.3 Removing the Right Cover (Upper)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the screw [1], and then detach the right cover (upper).

4.4.5.4 Removing the Left Cover (Rear)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
[1]
[2]
[1]
F-4-72
[3]
[2]
F-4-73
[1]
[2]
F-4-74
[2]
[1]
0010-6108

4.4.5.5 Removing the Reader Rear Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the screw, and then detach the small cover [2].
0010-6109
3) Remove the screw [1], and then disconnect the ground cable [2] of the
ADF harness.
4) Disconnect the four connectors [3], and then remove the ADF harness [4].
0010-6110
When installing the ADF harness [4], fit the harness band [5] in the
groove in the reader rear cover.
5) Remove the four screws [1], and then detach the reader rear cover [2].
F-4-75
[1]
[2]
F-4-76
[3]
[2]
[5]
[4]
F-4-77
Chapter 4
0010-6111
[1]
4-21