Removing The Option Power Supply Pcb; Hvt Pcb; Removing The Rear Cover; Removing The Right Cover (Lower) - Canon iR2020 Series Service Manual

Chapter 9
[1]

9.4.6.4 Removing the Option Power Supply PCB

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the connector (J16) [1] on the power supply PCB.
2) Disconnect the connector (J53) [1] on the power supply PCB. Remove the
three screws [2], and then remove the option power supply PCB [3].
[2]
[2]

9.4.7 HVT PCB

9.4.7.1 Removing the Rear Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].
9-12
[2]
F-9-60
[1]
F-9-61
[3]
[1] [2]
F-9-62
[1]
[2]
[1]
F-9-63

9.4.7.2 Removing the Right Cover (Lower)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
0011-0416
[1]

9.4.7.3 Removing the Delivery Tray

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the delivery tray [2].
[1]

9.4.7.4 Removing the Main Power Supply PCB

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the connector [1] and screw [2], and then remove the power
supply PCB [3].
[2]
0010-9971
[3]
[2]
F-9-64
[2]
F-9-65
[1] [2]
[2]
F-9-66
0010-9972
0010-9973
0010-9974