Before You Begin; Ip Address And Port Number; Logging In To The Thermostat; Real Time Clock - Proliphix Professional NT100e/h Configuration Manual

Professional series network thermostat
Table of Contents

Advertisement

Beta Draft Confidential

Before You Begin

Before you access and control your Proliphix Network Thermostat through either the
TDI or more comprehensively through the browser-based TMI, you must know the IP
address and port number of the local thermostat and enable the real time clock. The
following sections describe these pre-requisite tasks.

IP Address and Port Number

Your Proliphix Network Thermostat ships from the factory capable to support the
DHCP mode for assigning an IP address to your thermostat. See the
IP Addresses (page 3-2)
number for your thermostat and enter this information in your web browser.

Logging In to the Thermostat

To retrieve the IP address and port number using the Thermostat Device
Interface (buttons and control on the front of the thermostat):
From the
1
2-15)
Enter this IP address and port number (address:port_number) as the URL in your web
2
browser.
Log in to the thermostat as the Administrator as follows:
3
Username: admin
Password: admin (default)
Access the
4
Interface.
Disable the DHCP function by selecting Static for the IP address method.
5
Enter a unique IP address, Subnet Mask, Gateway, and HTTP port number.
6
Click Submit.
7

Real Time Clock

Your Proliphix Network Thermostat ships from the factory with the real time clock
disabled to ensure longer battery life. You must enable the real time clock to provide
years of accurate timekeeping on your thermostat.
To enable the real time clock:
On the
1
in the Set Date and Time field.
Click Submit.
2
Professional Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-200, Rev. 2
for more information. You must know the IP address and port
Status & Control Screen (page
and record the IP address and port number.
Network Settings Page (page 3-30)
General Settings Page (page
2-10), select the
Network Status Screen (page
in the Thermostat Management
3-14), check the Set Thermostat Time check box
Before You Begin
DHCP Assigned
1-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents