Status & Control Screen; Figure 2-8 Status & Control Screen; Table 2-5 Status & Control Screen Options - Proliphix Professional NT100e/h Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the TDI
Status & Control Screen
The Status & Control screen is the third primary screen. (This is the second primary
screen on the Professional Series thermostats if remote sensors are disabled.) You can
highlight each status field by pressing the Up or Down arrows on the thermostat. Press
Select to choose the desired status field.
You can access the following four secondary screens from the Status & Control
screen:
Figure 2-8 Status & Control Screen
Table 2-5
Table 2-5 Status & Control Screen Options
Option
Thermostat Control
Thermostat Status
Alarm Status
Network Status
2-10
Thermostat Control Screen (page 2-11)
Thermostat Status Screen (page 2-13)
Alarm Status Screen (page 2-14)
Network Status Screen (page 2-15)
lists the Status & Control screen options.
Professional Series Network Thermostat Configuration Guide, Release 3.0
Beta Draft Confidential
Description
When highlighted and selected, opens the
Screen (page 2-11).
When highlighted and selected, opens the
Screen (page 2-13).
When highlighted and selected, opens the
NT160e/h Alarm Status Screen (page
When highlighted and selected, opens the
(page 2-15).
Part No. 600-01000-200, Rev. 2
Thermostat Control
Thermostat Status
NT150e/h and
2-14).
Network Status Screen