Back Panel Overview; Operator Control Panel Leds; Back Panel Overview With Parallel Scsi Tape Drive - HP StorageWorks 1/8 User's And Service Manual

Figure 2 Operator control panel LEDs
.
1. Green
2. Amber
3. Amber
4. Amber

Back panel overview

The back panel provides access to the drive interface connectors, the tape drive, the power connector,
the Ethernet, serial and USB ports, and the magazine release holes as shown in
and Figure 5.
Figure 3 Back panel overview with parallel SCSI tape drive
.
1. Power connector
3. Tape drive
5. Ethernet port
7. USB port
9. 68–pin parallel SCSI connector
11. Tape drive LED
Ready. Illuminated when power is on. Blinking when there is tape drive or robotics activity.
Clean. Illuminated when the tape drive has determined that a cleaning cartridge should be
used. Cleaning is only necessary when the device directs you to do so. Additional cleaning
is not necessary.
Attention. Illuminated if the device has detected a condition that requires attention by the
operator.
Error. Illuminated if an unrecoverable error occurs. A corresponding error message displays
on the LCD screen (see Troubleshooting" on page 107 for more information).
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide
2. Fan vent
4. Magazine release hole
6. Serial port (Factory use only)
8. Shipping lock storage location
10. Pull-out tab containing the serial number and other
product information.
Figure 3, Figure 4,
23