Configuration Change Events - HP StorageWorks 1/8 User's And Service Manual

Configuration change events

Table 37 Configuration change events
Value
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
0x50
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x64
0x65
Configuration event
Drive SCSI changed
Library SCSI changed
Drive enable
Drive disable
Master drive assigned
Drive sled added
Drive sled removed
Library mode changed
Element address
Net parameter
Slots reserved
Mailslot support
Admin password
Date/time set
Barcode format
Default config set
FW upgrade Library
FW upgrade drive
Auto-clean feature set
Drive FC parameters
Power supply added
Key server token was removed
Key server token was inserted
Encryption has been enabled
Encryption has been disabled
Library door lock status change
Hostname has been changed
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide
Description
Drive SCSI ID has changed
Library SCSI ID changed (*)
Drive was enabled
Drive disabled
Drive master assigned
Drive sled added
Drive sled removed
Library mode changed (automatic, sequential,
random)
Element address changed
Network parameter has changed
Slots reserved
Mailslot support
Admin password has changed
Date and time of RTC set
Barcode format alignment changed
Default configuration set
Library firmware was upgraded
Drive firmware was upgraded
Auto-cleaning switched on or off
Drive Fibre Channel parameters changed
A power supply was added to the system
A key server token was removed
A key server token was inserted
Encryption has been enabled
Encryption has been disabled
The status of the Library door lock has changed
Hostname has been changed
153