Drive Error Codes; Device Error Sub-Codes - HP StorageWorks 1/8 User's And Service Manual

3
Elevator: The part of the robotics assembly that moves in the vertical direction.
4
Rotation: The part of the robotics assembly that turns the robot to face each magazine and the drive.
5
Sled: The part of the robotics assembly that moves the robot towards the OCP or back towards the
drive.
Table 34 Device error sub-codes
Error code
90
91
92
93
94
95
96
97
98

Drive error codes

Table 35 Drive error codes
Error code
01
02
03
04
05
06
07
Description
Robotic load not reached Cartridge Present sensor
No activity after Load command
Time-out while loading tape
No activity after load command
Time-out drive Unload
Drive terminated unsuccessfully
Tape not ejected at robot unload
Slot not free at robot unload
Cartridge not seated in load phase 1
Description
Drive broken
Temperature exceeds limit
Tape error
Cleaning cartridge is expired
Drive needs cleaning
Autoloader lost communication with the drive
Warning that the tape is nearing its end of life
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 147