HP StorageWorks 1/8 User's And Service Manual: Setting The Date And Time; Configuration: Password

G2 tape autoloader.
Hide thumbs

Advertisement

NOTE:
You must set the administrator password with the OCP before you can access administrator functionality
in the RMI. See
Password)" on page 90.
Figure 42 Configuration: Password page
.
You may change the:
Password — The password is exactly eight numbers, each from 0 to 9.
Password Time Out — The number of minutes that the current administrator login session will remain
logged in without user interaction.

Setting the date and time

Use the
Configuration: Date/Time page
NOTE:
The device does not adjust its time to daylight saving time; the time must be adjusted manually.
70
Operating the Tape Autoloader
Changing the administrator password (Configuration > Change Admin
to set the date and time.

Advertisement

   Also See for HP StorageWorks 1/8

   Related Manuals for HP StorageWorks 1/8

This manual also for:

Hdx 18

Comments to this Manuals

Symbols: 0
Latest comments: