Features And Overview; Model And Interface Type; Ultrium 448 1/8 G2 Tape Autoloader Specifications - HP StorageWorks 1/8 User's And Service Manual

G2 tape autoloader
Hide thumbs Also See for StorageWorks 1/8:
Table of Contents

Advertisement

1 Features and overview

The Autoloader provides a compact, high-capacity, low-cost solution for simple, unattended data
backup. This unique design houses up to eight tape cartridges in a compact 1U form factor with easy
access to tape cartridges via two removable magazines and a configurable mailslot. Each magazine
can hold up to four cartridges.
The Autoloader can support Ultrium half-height tape drives. To see the tape drives currently available
for the 1/8 G2 Tape Autoloader, see the MSL QuickSpecs at http://www.hp.com/go/tape. For a
list of all supported configurations, go to http://www.hp.com/go/ebs.
The Autoloader is compatible with most operating systems and environments that support the SAS,
parallel SCSI, or Fibre Channel interfaces. However, the Autoloader requires either direct support
from the operating system or a compatible backup application to take full advantage of its many
features. To verify compatibility, go to http://www.hp.com/go/ebs.
The Autoloader uses the interface types described in
a single SCSI ID with two logical unit numbers (LUNs) — one for the tape drive and the other for the
robotic.
Table 1 Model and interface type
LTO generation
LTO-2
LTO-3, LTO-4
LTO-5
Maximum storage capacity, maximum data transfer rates, and tape cartridges are specified in
2,
Table
3,
Table
Table 2 Ultrium 448 1/8 G2 Tape Autoloader specifications
Characteristic
Maximum storage capacity, 8
data cartridges
Maximum data transfer rate
Data cartridges
Interface
Ultra 160 SCSI LVD/SE
Ultra 320 SCSI LVD, SAS
Fibre Channel, SAS
4, and
Table 5
on page 16.
Specification
Native: 1.6 TB (8 x 200 GB) Compressed (2:1): 3.2 TB
Native: 24 MB/s (86 GB/hr) Compressed (2:1): 48 MB/s (172 GB/hr)
HP LTO2 Ultrium 400 GB Data Cartridge, red, part number C7972A
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide
Table
1. The parallel SCSI Tape Autoloader uses
SCSI ID
4
4
NA
Table
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdx 18

Table of Contents