Enabling Static Wep - Cisco CB21AG Installation And Configuration Manual

Setting Security Parameters
Table 5-4
Security Feature
TKIP
Broadcast key rotation

Enabling Static WEP

Follow the steps below to enable static WEP for this profile.
Choose Pre-Shared Key (Static WEP) on the Profile Management (Security) window.
Step 1
Step 2 Click Configure. The Define Pre-Shared Keys window appears (see
Figure 5-5
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-24
Client and Access Point Security Settings (continued)
Client Setting
No settings required; automatically
enabled
Enable LEAP, EAP-FAST,
EAP-TLS, PEAP (EAP-GTC), or
PEAP (EAP-MSCHAP V2)
Define Pre-Shared Keys Window
Chapter 5 Configuring the Client Adapter
Access Point Setting
Set up and enable WEP, set TKIP to
Cisco or check the Enable Per
Packet Keying check box, and set
Use Aironet Extensions to Yes
Set up and enable WEP and set
Broadcast WEP Key Rotation
Interval to any value other than
zero (0)
Figure 5-5).
OL-4211-03