After Your Eap-Fast Password Expires - Cisco CB21AG Installation And Configuration Manual

Chapter 6 Using EAP Authentication
The LEAP or EAP-FAST Authentication Status window appears.
Step 4 If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision
a PAC, click Yes.
Step 5 If your client adapter authenticates, the window shows that each stage was successful and then
disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.
If the authentication attempt fails, an error message appears after the authentication timeout period has
expired. Refer to the

After Your EAP-FAST Password Expires

If the EAP-FAST password for your current profile expires or becomes invalid, follow these steps to
change your password.
When the Please Change Password window appears (see
Step 1
invalid, enter your old password in the Old Password field.
Figure 6-9
Step 2 Enter your new password in both the New Password and Verify New Password fields.
Step 3 Click OK. The client adapter should authenticate using your new password.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
"Error Messages" section on page 10-12
Please Change Password Window
Using LEAP or EAP-FAST with a Manually Prompted Login
for the necessary action to take.
Figure 6-9) to indicate that your password is
6-11