Cisco CB21AG Installation And Configuration Manual page 165

Chapter 8 Using the Aironet System Tray Utility (ASTU)
Table 8-3
Status Element
Link Quality
SSID
Access Point Name
Access Point IP Address
Current Receive Rate
Current Transmit Rate
Client Adapter IP Address
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Connection Status Window Elements (continued)
Description
The client adapter's signal strength for all received packets.
Value: Excellent, Good, Fair, Poor, or No Link
The name of the network to which your client adapter is currently
associated.
Refer to the SSID1 parameter in
Note
setting the client adapter's SSID.
The name of the access point to which your client adapter is associated.
It is shown only if the client adapter is in infrastructure mode, the
access point was configured with a name, and Aironet Extensions are
enabled (on access points running Cisco IOS Release 12.2(4)JA or
later).
This field shows up to 15 characters although the name of the
Note
access point may be longer.
The IP address of the access point to which your client adapter is
associated. It is shown only if the client adapter is in infrastructure
mode, the access point was configured with an IP address, and Aironet
Extensions are enabled (on access points running Cisco IOS Release
12.2(4)JA or later).
Note If Aironet Extensions are disabled, the IP address of the
associated access point is shown as 0.0.0.0.
The rate at which your client adapter is currently receiving data
packets.
Value: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps
The rate at which your client adapter is currently transmitting data
packets.
Value: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps
The IP address of your client adapter.
Pop-Up Menu
Table 5-2 for information on
8-11