Cisco CB21AG Installation And Configuration Manual page 110

Setting Security Parameters
Step 6 Perform one of the following to specify the username that will be used for inner PEAP tunnel
authentication:
• If you want your Windows username to also serve as your PEAP username, check the Use Windows
User Name check box. This option gives you only one username to remember.
Note
• If you want to enter a separate PEAP username (which is registered with the RADIUS server) in
addition to your regular Windows username in order to start the PEAP authentication process, enter
your PEAP username in the User Name field.
Note
Step 7 If you entered a PEAP username in the previous step and chose the Static Password option in
enter your PEAP authentication password (which is registered with the RADIUS server) in both the
Password and Confirm Password fields.
If the Use Windows User Name and Password check box is unchecked and you want to implement added
Step 8
security by further refining the network certificate that will be accepted and controlling the string used to set
up the outer PEAP tunnel, follow these steps:
Click Advanced. The Configuration Settings window appears (see
a.
Figure 5-14
Leave the Specific Server or Domain field blank to allow the client to accept a certificate from any
b.
server that supplies a certificate signed by the certificate authority listed in the Trusted Root
Certification Authorities drop-down box on the Define PEAP (EAP-GTC) Configuration window
(this is the recommended option) or enter the domain name of the server from which the client will
accept a certificate.
If the Login Name field is not filled in automatically, enter your username with nothing after it (for
c.
example, jsmith).
Click OK to save your settings.
d.
Click OK to save your settings and return to the Profile Management (Security) window.
Step 9
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-44
If you chose the Static Password option in
Name and Password.
Your Windows username is filled in automatically. Simply delete your Windows username
and enter your separate PEAP username.
Configuration Settings Window
Chapter 5 Configuring the Client Adapter
Step 5, the check box reads Use Windows User
Figure 5-14).
Step 5,
OL-4211-03