Viewing Ap Details - Cisco CB21AG Installation And Configuration Manual

Using the AP Scan List Tab

Viewing AP Details

To view details for a particular access point in the AP scan list, select the desired network name in the
scan list and click View AP Details. The AP Detailed Information window appears (see
Note You can also open the AP Detailed Information window by double-clicking in the first column of the
desired row.
Figure F-6
Table F-3
The AP Detailed Information window contains tegxt summaries of all the information elements present
Note
in the access point's beacon or probe response. As a result, the window may contain different
information than that described in
Table F-3
Detailed Information
Parameter
SSID
MAC Address
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows
F-12
Site Survey Utility - AP Detailed Information Window
interprets the information that is displayed in the AP Detailed Information window.
Table
Site Survey Utility - AP Detailed Information
Description
The network name, or service set identifier (SSID), indicates the name of the
access point's wireless network.
The access point's MAC address.
This field displays the MAC address of the access point's Ethernet
Note
port (for access points that do not run Cisco IOS software) or the
MAC address of the access point's radio (for access points that run
Cisco IOS software). The MAC address of the Ethernet port on access
points that run Cisco IOS software is printed on a label on the back of
the device.
F-3.
Appendix F Performing a Site Survey
Figure F-6).
OL-4211-03