Cisco CB21AG Installation And Configuration Manual page 181

Chapter 10 Troubleshooting
Figure 10-2
One of the following status messages appears for each test:
Test passed—The test completed successfully.
•
• Test bypassed—The test was skipped because it was not required for the active profile.
• Test failed—The test failed. Follow the instructions in
Note
Step 3 To view more detailed information, click View Report. A report appears that provides more detailed
results for your client adapter (see
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Troubleshooting Utility Window (with Test Results)
You can click Stop Test at any time to stop the testing process, or you can click Start Test after
the testing process has stopped to run the test again.
Step 3
Figure 10-3).
Troubleshooting the Client Adapter
to obtain more details.
10-5