Cisco CB21AG Installation And Configuration Manual page 113

Chapter 5 Configuring the Client Adapter
Step 3 Check the Use Machine Information For Domain Logon check box if you want the client to attempt
to log into a domain using machine authentication with user credentials rather than user authentication.
Doing so enables your computer to connect to the network prior to user logon. The default setting is
checked.
Note
Choose the certificate authority from which the server certificate was downloaded in the Trusted Root
Step 4
Certification Authorities drop-down box.
Perform one of the following to specify the username and password that will be used for inner PEAP
Step 5
tunnel authentication:
If you want your Windows username and password to also serve as your PEAP username and
•
password, check the Use Windows User Name and Password check box.
If you want to use a distinct username and password (which are registered with the RADIUS server)
•
to start the PEAP authentication process, follow these steps:
a.
b.
Step 6 If the Use Windows User Name and Password check box is unchecked and you want to implement added
security by further refining the network certificate that will be accepted and controlling the string used to set
up the outer PEAP tunnel, follow these steps:
Click Advanced. The Configuration Settings window appears (see
a.
Figure 5-16
b. Leave the Specific Server or Domain field blank to allow the client to accept a certificate from any
server that supplies a certificate signed by the certificate authority listed in the Trusted Root
Certification Authorities drop-down box on the Define PEAP (EAP-MSCHAP V2) Configuration
window (this is the recommended option) or enter the domain name of the server from which the
client will accept a certificate.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
If you do not check the Use Machine Information For Domain Logon check box, machine
authentication is not performed. Authentication does not occur until you log on.
Enter your PEAP username and password in the corresponding fields.
Your Windows username is filled in automatically. Simply delete your Windows
Note
username and enter your separate PEAP username.
Re-enter your password in the Confirm Password field.
Configuration Settings Window
Setting Security Parameters
Figure 5-16).
5-47