Cisco CB21AG Installation And Configuration Manual page 164

Pop-Up Menu
Table 8-3
Status Element
Active Profile
Auto Profile Selection
Connection Status
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
8-10
Connection Status Window Elements
Description
The network configuration (or profile) that your client adapter is
currently using.
Indicates whether your client adapter is using auto profile selection.
Value: Enabled or Disabled
The operational mode of your client adapter.
Value: Not Associated, Associated, Authenticating, Authenticated,
Authentication Failed, or Authentication Failed Retrying
Connection Status
Not Associated
Associated
Authenticating
Authenticated
Authentication Failed
Authentication Failed
Retrying
Chapter 8 Using the Aironet System Tray Utility (ASTU)
Description
The client adapter has not established a
connection to an access point (in
infrastructure mode) or another client (in
ad hoc mode).
The client adapter has established a
connection to an access point (in
infrastructure mode) or another client (in
ad hoc mode).
The client adapter is associated to an
access point, and the EAP authentication
process has begun but not yet succeeded.
The client adapter is associated to an
access point, and the user is EAP
authenticated.
The client adapter is associated to an
access point, but the user has failed to EAP
authenticate.
This status may appear very
Note
briefly or not at all as the
authentication failure may result
in the client adapter becoming
disassociated, in which case the
status reads Not Associated.
The client adapter is associated to an
access point, the user has failed to EAP
authenticate, but another authentication
attempt is being made.
This status may appear very
Note
briefly or not at all as the
authentication failure may result
in the client adapter becoming
disassociated, in which case the
status reads Not Associated.
OL-4211-03