Using Static Wep; Enabling Static Wep And Entering A New Static Wep Key - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Using Static WEP

Table 5-2
Security Feature
TKIP
Broadcast key rotation

Using Static WEP

This section provides instructions for entering new static WEP keys or overwriting existing static WEP
keys.

Enabling Static WEP and Entering a New Static WEP Key

Follow these steps to enter a new static WEP key for this profile.
From the Properties screen, select Network Security Type under Property and None from the list of
Step 1
options in the Value box.
Select WEP under Property and Static WEP Keys from the list of options in the Value box.
Step 2
Tap the WEP Keys button. The WEP Keys screen appears (see
Step 3
Figure 5-3
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
5-18
Client and Access Point Security Settings
Client Setting
Automatically enabled in firmware Set up and enable WEP, set TKIP to
Enable LEAP, EAP-FAST,
EAP-TLS, or PEAP
WEP Keys Screen
Chapter 5 Configuring the Client Adapter
Access Point Setting
Cisco or select Enable Per Packet
Keying check box, and set Use
Aironet Extensions to Yes
Set up and enable WEP and set
Broadcast WEP Key Rotation
Interval to any value other than
zero (0)
Figure 5-3).
OL-1375-04