Chapter 5
Configuring the Client Adapter
Setting Roaming Parameters in the Windows Control Panel
The Cisco Aironet 802.11a/b/g Wireless Adapter Properties window (see
Control Panel enables you to set two parameters that regulate the client adapter's roaming capabilities.
Figure 5-21
Follow these steps to access the roaming parameters.
Double-click My Computer, Control Panel, and System.
Step 1
Step 2
Click the Hardware tab and Device Manager.
Step 3
Double-click Network Adapters.
Step 4
Right-click Cisco Aironet 802.11a/b/g Wireless Adapter.
Step 5
Click Properties and the Advanced tab. The roaming parameters appear in the Property list.
lists and describes the client adapter's roaming parameters. Follow the instructions in the table to change
the parameters.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Cisco Aironet 802.11a/b/g Wireless Adapter Properties Window
Setting Roaming Parameters in the Windows Control Panel
Figure
5-21) in the Windows
Table 5-5
5-55