Cisco CB21AG Installation And Configuration Manual page 197

Chapter 10 Troubleshooting
Error Message You chose not to copy your private PAC. If you experience wireless
connection problems during Windows domain logon or logged off stage, you must
reconfigure the profile to use a global PAC.
Explanation
when you are not logged on, you clicked No.
Recommended Action
experience any wireless connection problems, you may need to reconfigure your profile to use a
global PAC.
Error Message You do not have a valid Protected Access Credentials (PAC), the PAC
you provided does not match the authentication server, or the PAC is expired. You
may proceed with authenticating if the server supports auto provisioning. Do you
want to proceed and accept auto provisioning?
Explanation
and does not specify a PAC authority for which you have a current valid PAC.
Recommended Action
Otherwise, click No. If you choose No, a message appears indicating that the client adapter was
unable to EAP-FAST authenticate.
Error Message You failed to change your EAP-FAST domain/network password. Make sure
you enter a new password that complies with the password policy and try again. Do
you want to retry now?
Explanation
Recommended Action
appears, enter your new password. Otherwise, click No to cancel the operation.
Error Message You have just changed your network password. You must change your saved
password settings in the EAP-FAST profiles before connecting again.
Explanation
Recommended Action
EAP-FAST profiles that are configured with a saved username and password.
Error Message You must configure the PEAP-GTC settings properly. User information,
password, or machine information is incomplete.
Explanation
Recommended Action
information.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
When you were prompted to copy your PAC to the global store so that it will be available
The profile will use the private PAC for authentication. However, if you
You activated an EAP-FAST profile that is configured for automatic PAC provisioning
If you want to attempt to auto-provision a PAC from the server, click Yes.
An error occurred when you attempted to change your EAP-FAST password.
Click Yes to try again. When the Enter Wireless Network Password window
Your network password has changed.
Update your EAP-FAST password on the EAP-FAST Settings window for any
You improperly configured a PEAP (EAP-GTC) profile.
Modify the profile's configuration settings, making sure to enter all necessary
Error Messages
10-21