Cisco CB21AG Installation And Configuration Manual page 245

Appendix E Configuring the Client Adapter through the Windows XP Operating System
Step 5 Check the Connect only if server is signed by specified trusted root CA check box if you want to
ensure that the certificate server uses the trusted root certificate specified in the field above. This
prevents the client from establishing connections to rogue access points.
Currently Generic Token Card is the only second phase EAP type available. Click Properties. The
Step 6
Generic Token Card Properties window appears (see
Figure E-9
Step 7 Choose either the Static Password (Windows NT/2000, LDAP) or the One Time Password option,
depending on your user database.
Step 8 Perform one of the following:
• If you chose the Static Password (Windows NT/2000, LDAP) option in
• If you chose the One Time Password option in
boxes to specify the type of tokens that will be supported for one-time passwords:
–
–
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Generic Token Card Properties Window
Support Hardware Token—A hardware token device obtains the one-time password. You
must use your hardware token device to obtain the one-time password and enter the password
when prompted for your user credentials.
Support Software Token—The PEAP supplicant works with a software token program to
retrieve the one-time password. You have to enter only the PIN, not the one-time password. If
you check this check box, you must also choose from the Supported Type drop-down box the
software token software that is installed on the client (such as Secure Computing SofToken
Version 2.1, Secure Computing SofToken II 2.0, or RSA SecurID Software Token 2.5), and if
Secure Computing SofToken Version 2.1 is selected, you must find the software program path
using the Browse button.
The SofToken Program Path field is unavailable if a software token program other than
Note
Secure Computing SofToken Version 2.1 is selected.
Configuring the Client Adapter
Figure E-9).
Step
Step 7, check one or both of the following check
7, go to Step 9.
E-17