Cisco CB21AG Installation And Configuration Manual page 193

Chapter 10 Troubleshooting
Error Message The EAP-FAST auto provisioning or PAC updating failed. The current
profile is disabled until you correct the PAC configuration in the profile and
reauthenticate.
Explanation
Recommended Action
provisioning is enabled, make sure to allow a PAC to be provisioned if prompted. If the
authentication attempt fails again, modify the profile's PAC configuration settings.
Error Message The entered password was incorrect. Please try again.
Explanation
Recommended Action
Error Message The imported PAC already exists on your local machine. Do you want to
update it anyway?
Explanation
Recommended Action
or click No to cancel the operation.
Error Message The new password must be different from the old password.
Explanation
Password fields on the Please Change Password window.
Recommended Action
Password fields on the Please Change Password window.
Error Message The Passphrase must be between 8 and 64 characters.
Explanation
Key window did not contain the correct number of characters.
Recommended Action
hexadecimal characters.
Error Message The password is empty. Please enter a password.
Explanation
Settings window but did not enter a password, or you did not enter a password on the Enter Wireless
Network Password window.
Recommended Action
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
PAC provisioning has failed. No PAC has been provisioned, and the profile is disabled.
Try again to authenticate using the existing profile. If automatic PAC
You incorrectly entered the PAC file password.
Carefully re-enter the PAC file password.
You tried to import a PAC file with the same PAC ID as a previously imported PAC file.
Click Yes to replace the existing PAC with the new one from the imported file
You entered your old EAP-FAST password in the New Password and/or Verify New
Enter your new EAP-FAST password in the New Password and/or Verify New
The WPA/WPA2 Passphrase that you entered on the Define WPA/WPA2 Pre-Shared
Enter a WPA/WPA2 Passphrase with 8 to 63 ASCII text characters or 64
You chose the Use Saved User Name and Password option on the LEAP or EAP-FAST
Enter your LEAP or EAP-FAST password in the Password field.
Error Messages
10-17