Cisco CB21AG Installation And Configuration Manual page 192

Error Messages
Error Message Please enter a Passphrase.
Explanation
Passphrase.
Recommended Action
window and then click OK.
Error Message Please enter a profile name.
Explanation
before entering a profile name on the Profile Management (General) window.
Recommended Action
Error Message Please enter at least one shared key.
Explanation
key.
Recommended Action
Error Message Please enter exactly 12 characters, or leave the entry field empty.
Explanation
window.
Recommended Action
MAC address for the specified access point, which must be exactly 12 characters.
Error Message The configuration name you entered is already being used. Enter a
unique name.
Explanation
(General) window that already exists.
Recommended Action
Error Message The current EAP-FAST profile does not have a PAC or the configured PAC
does not match the authentication server. Do you want to use another PAC found on
your local system that matches the authentication server without reconfiguring the
current EAP-FAST profile?
Explanation
ADU matches the username and server name that it is trying to use with those in the PAC. If they do not
match or the configured PAC does not exist, ADU searches the private and global stores. If a matching
PAC is found, the user is prompted with this message before the PAC is used
Recommended Action
having to reconfigure your profile.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
10-16
You clicked OK on the Define WPA/WPA2 Pre-Shared Key window before entering a
Enter a WPA/WPA2 Passphrase on the Define WPA/WPA2 Pre-Shared Key
While creating a new profile, you clicked OK or chose another Profile Management tab
Enter a profile name.
You clicked OK on the Define Pre-Shared Keys window before entering a static WEP
Enter at least one static WEP key on the Define Pre-Shared Keys window.
You entered fewer than 12 characters in one of the fields on the Preferred Access Points
Leave the fields on the Preferred Access Points window empty or re-enter the
While creating a new profile, you entered a profile name on the Profile Management
Enter a new profile name.
The client adapter's authentication attempt failed because a valid PAC was not found.
Click Yes to attempt to authenticate using another PAC on your system without
Chapter 10 Troubleshooting
.
OL-4211-03