Cisco CB21AG Installation And Configuration Manual page 99

Chapter 5 Configuring the Client Adapter
Step 4 Perform one of the following:
• If you chose Use Temporary User Name and Password in
options:
–
–
–
• If you chose Use Saved User Name and Password in
a.
b.
c.
If you work in an environment with multiple domains and therefore want your Windows login domain
Step 5
to be passed to the RADIUS server along with your username, check the Include Windows Logon
Domain with User Name check box. The default setting is checked.
Note
Step 6 If you want to force the client adapter to disassociate after you log off so that another user cannot gain
access to the wireless network using your credentials, check the No Network Connection Unless User
Is Logged In check box. The default setting is checked.
Step 7 In the Authentication Timeout Value field, choose the amount of time (in seconds) before an EAP-FAST
authentication attempt is considered to be failed and an error message appears.
Range: 30 to 500 seconds
Default: 90 seconds
Step 8 Perform one of the following:
• If you want to enable automatic PAC provisioning, make sure the Allow Automatic PAC
Provisioning for this Profile check box is checked. A protected access credentials (PAC) is
obtained automatically as needed (for instance, when a PAC expires, when the client adapter
accesses a different server, when the EAP-FAST username cannot be matched to a previously
provisioned PAC, etc.). This is the default setting.
If you want to enable manual PAC provisioning, uncheck the Allow Automatic PAC Provisioning
•
for this Profile check box. This option requires you to choose a PAC authority or manually import
a PAC file.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Use Windows User Name and Password—Causes your Windows username and password to
also serve as your EAP-FAST username and password, giving you only one set of credentials to
remember. After you log in, the authentication process begins automatically. This option is the
default setting.
Automatically Prompt for User Name and Password—Requires you to enter a separate
EAP-FAST username and password (which are registered with the RADIUS server) in addition
to your regular Windows login in order to start the authentication process.
Manually Prompt for User Name and Password—Requires you to manually invoke the
EAP-FAST authentication process as needed using the Manual Login option in the Action
drop-down menu or ASTU. You are not prompted to enter an EAP-FAST username and
password during the Windows login. This option might be used to support a software token
one-time password system or other systems that require additional software that is not available
at login.
Enter a username and password in the appropriate fields.
Re-enter the password in the Confirm Password field.
If you wish to specify a domain name that will be passed to the RADIUS server along with your
username, enter it in the Domain field.
If you chose to use a saved username and password but do not check the Include Windows Logon
Domain with User Name check box, the saved domain name is not passed to the RADIUS server.
Setting Security Parameters
Step 3, choose one of the following
Step 3, follow these steps:
5-33