Cisco CB21AG Installation And Configuration Manual page 234

Configuring the Client Adapter
Figure E-1
Make sure that the Use Windows to configure my wireless network settings check box is checked.
Step 6
Choose the SSID of the access point to which you want the client adapter to associate from the list of
Step 7
available networks and click Configure. If the SSID of the access point you want to use is not listed or
you are planning to operate the client adapter in an ad hoc network (a computer-to-computer network
without access points), click Add.
Note
The Wireless Network Properties window appears (see
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
E-6
Appendix E
Wireless Network Connection Properties Window (Wireless Networks Tab)
The Allow Broadcast SSID to Associate option on the access point must be enabled for the SSID
to appear in the list of available networks.
Configuring the Client Adapter through the Windows XP Operating System
Figure E-2).
OL-4211-03