Including A Profile In Auto Profile Selection - Cisco CB21AG Installation And Configuration Manual

Chapter 4 Using the Profile Manager

Including a Profile in Auto Profile Selection

After you have created profiles for your client adapter, you can choose to include them in the profile
manager's auto profile selection feature. Then when auto profile selection is enabled, the client adapter
automatically selects a profile from the list of profiles that were included in auto profile selection and
uses it to establish a connection to the network.
Follow these steps to include any of your profiles in auto profile selection and to establish the order in
which the profiles will be selected for use.
Step 1 Open ADU and click the Profile Management tab.
Click Order Profiles. The Auto Profile Selection Management window appears (see
Step 2
Figure 4-4
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Auto Profile Selection Management Window

Including a Profile in Auto Profile Selection

Figure 4-4).
4-7