Cisco CB21AG Installation And Configuration Manual page 190

Error Messages
Error Message Cisco Aironet 802.11a/b/g wireless adapter software update can't
proceed. Please insert the adapter in the system and try again.
Explanation
inserted in your computer.
Recommended Action
Error Message DHCP failure.
Explanation
Recommended Action
administrator.
Error Message During installation, you chose not to use Microsoft Wireless
Configuration Manager to control your Cisco Aironet Wireless LAN Client Adapter.
However, it is currently enabled for this device. Do you want to disable it?
Explanation
your client adapter.
Recommended Action
Manager to ADU, click Yes. Otherwise, click No.
Error Message Entry must be xx characters long. Please enter xx more characters.
Explanation
contain the correct number of characters.
Recommended Action
WEP" section on page
Error Message Error importing the EAP-FAST PAC file.
Explanation
completed.
Recommended Action
PAC file from your system administrator and import it.
Error Message Failed to initialize supplicant. This error may be due to the absence
of a valid machine certificate or the incomplete configuration of profiles.
Explanation
Recommended Action
that your client adapter's current profile has been configured properly.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
10-14
You attempted to upgrade your client adapter's software when the adapter was not
Click OK, insert your client adapter, and start the upgrade process again.
The domain logon failed because of a DHCP failure.
Try again to authenticate. If this message reappears, contact your system
The Microsoft Wireless Configuration Manager is enabled and can be used to control
If you want to switch control from the Microsoft Wireless Configuration
The static WEP key that you entered on the Define Pre-Shared Keys window does not
Re-enter the static WEP key following the guidelines in the
5-24.
An error occurred while a PAC file was being imported. The operation was not
Try again to import the PAC file. If the same message appears, obtain a new
The domain logon failed because the EAP supplicant could not be initialized.
Verify that a valid machine certificate has been loaded onto your computer and
Chapter 10 Troubleshooting
"Enabling Static
OL-4211-03