Cisco CB21AG Installation And Configuration Manual page 87

Chapter 5 Configuring the Client Adapter
Table 5-4
Security Feature
WPA or WPA2 passphrase
(or WPA or WPA2
pre-shared key)
LEAP authentication
LEAP authentication with
WPA or WPA2
EAP-FAST authentication
EAP-FAST authentication
with WPA or WPA2
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Client and Access Point Security Settings (continued)
Client Setting
Choose WPA/WPA2 Passphrase
and enter the passphrase
Choose 802.1x and LEAP; then set
LEAP settings
Choose WPA/WPA2/CCKM and
LEAP; then set LEAP settings
Choose 802.1x and EAP-FAST, set
EAP-FAST settings, and enable
automatic provisioning or import a
PAC file
Choose WPA/WPA2/CCKM and
EAP-FAST, set EAP-FAST
settings, and enable automatic
provisioning or import a PAC file
Setting Security Parameters
Access Point Setting
Choose a cipher suite, enable Open
Authentication and WPA for the
SSID, and enter a WPA pre-shared
key
To allow both WPA and
Note
non-WPA clients to use the
SSID, enable optional
WPA.
Set up and enable WEP and enable
Network-EAP Authentication for
the SSID
For WPA, choose a cipher suite that
includes TKIP and enable
Network-EAP and Open with EAP
Authentication and WPA for the
SSID
For WPA2, choose a cipher suite
that includes AES-CCMP and
enable Network-EAP and Open
with EAP Authentication and WPA
for the SSID
Note To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
Set up and enable WEP and enable
both Network-EAP and Open with
EAP Authentication for the SSID
For WPA, choose a cipher suite that
includes TKIP and enable both
Network-EAP and Open with EAP
Authentication as well as WPA for
the SSID
For WPA2, choose a cipher suite
that includes AES-CCMP and
enable both Network-EAP and
Open with EAP Authentication as
well as WPA for the SSID
Note To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
5-21