Important Maintenance Items During Service Operations; Lubrication And Glue - Epson Stylus PRO Color Large Format Inkjet Printer 7000 Service Manual

EPSON Stylus Pro 7000
6.1.3 Important Maintenance Items During Service
Operations
Check the following items during printer maintenance/service and perform
any necessary operations.
Table 6-3. Items to be Checked During Maintenance/Service
Items Check Points
Make sure no paper,
Lower Paper Guide
dust, or foreign objects
and the surface of the
are attached or have
Subplaten
accumulated.
Make sure there is no
gap between the caps
and printheads when
Capping position
the carriage is in the
capped position (look
from above)
Make sure no dust or
foreign objects are
attached or have
T-Fence
accumulated, and
(Step ruler)
make sure it is not
ripped, bent, or
stained.
Make sure there are no
Rail on the CR guide
foreign objects
frame
attached.
Make sure no paper,
P_REAR sensor and
dust, or foreign objects
P_FRONT sensor
are attached or have
surface
accumulated.
Maintenance
Remedy
Cleaning (If there is an
ink stain, wipe with
dry, clean cloth after
cleaning the ink stain
with damp cloth.)
Loosen the
maintenance bracket
screws, push up the
bracket, and secure the
screws.
1) Cleaning
2) Replace if there are
any rips or stains
Cleaning
Cleaning
General Maintenance Issues

6.1.4 Lubrication and Glue

Unlike the EPSON Stylus Pro 9000, this printer requires some grease and glue
as described below.
Table 6-4. Grease and Glue Application
Type Name Amount
Super-Multi Oil #32 n/a
Grease
G-26 40g
(Molicoat EM-60L) (n/a)
Glue Screw lock 1,000g
Do not apply any other oils, lubricants, or glues than those
described in this manual; otherwise printer parts may be
damaged or their useful life may be shortened.
Revision B
Company Part # Location
n/a
bearings
Other parts
EPSON
B702600001
(Dow Corning Asia)
mechanism
Screw lock
EPSON B730200200
Carriage
rail
on
(blue)
207