Installing The Mezzanine Card Support Bracket - Dell PowerEdge M830 Owner's Manual

Installing the mezzanine card support bracket

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the #2 Phillips screwdriver ready.
4. Remove the mezzanine card support bracket.
NOTE: You must remove the mezzanine card support bracket to replace a faulty system board.
Steps
1. Orient the mezzanine card support bracket toward the back of the system.
2. Align the tabs on the mezzanine card support bracket with the slots on the system and slide it until
the tabs on the support bracket engage with the slots on the system.
3. Install the screw to secure the mezzanine card support bracket on the system board.
Figure 19. Installing the mezzanine card support bracket
1. screw
3. tab on the bracket (2)
2. mezzanine card support bracket
4. slot on the system (2)
81