Figure 9-63: Assigning Trunks To Trunk Group Id #1; Figure 9-65: Configuring Accounts For Pbx Registration To Itsps In Account Table; Figure 9-66: Configuring Itsp-To-Trunk Group #1 Routing In Ip To Trunk Group Table; Figure 9-67: Configuring Tel-To-Ip Routing To Itsps In Tel To Ip Routing Table - AudioCodes Mediant 1000 User Manual

SIP User's Manual
4. In the 'Trunk Group Table' page, enable the Trunks connected between the
Enterprise's PBX and the device (Trunk Group ID #1), and between the local PSTN
and the device (Trunk Group ID #2).
5. In the 'Trunk Group Settings' page, configure 'Per Account' registration for Trunk
Group ID #1 (without serving IP Group)
Figure 9-64: Configuring Trunk Group #1 for Registration per Account in Trunk Group Settings
6. In the 'Account Table' page, configure the two Accounts for PBX trunk registration to
ITSPs using the same Trunk Group (i.e., ID #1), but different serving IP Groups #1 and
#2. For each account, define user name, password, and hostname, and ContactUser.
The Register messages use different URI's (Hostname and ContactUser) in the From,
To, and Contact headers per ITSP. Enable registration for both accounts
Figure 9-65: Configuring Accounts for PBX Registration to ITSPs in Account Table Page
7. In the 'Inbound IP Routing Table' page, configure IP-to-Tel routing for calls from ITSPs
to Trunk Group ID #1 (see 1 below) and from the device to the local PSTN (see 2
below)
Figure 9-66: Configuring ITSP-to-Trunk Group #1 Routing in IP to Trunk Group Table Page
8. In the 'Outbound IP Routing Table' page, configure Tel-to-IP routing rules for calls to
ITSPs (see first entry below) and to local PSTN (see second and third entries below)
Figure 9-67: Configuring Tel-to-IP Routing to ITSPs in Tel to IP Routing Table Page
Version 6.0

Figure 9-63: Assigning Trunks to Trunk Group ID #1

.
Page
589
9. IP Telephony Capabilities
.
March 2010
.