SIP User's Manual
Parameter
Web: NPI
EMS: Number Plan
[_NumberPlan]
3.3.5.9.4 Configuring Redirect Number Tel to IP
The 'Redirect Number Tel > IP' page allow you to configure Tel-to-IP Redirect Number
manipulation rules. This feature manipulates the prefix of the redirect number received from
the PSTN for the outgoing SIP Diversion, Resource-Priority, or History-Info header that is
sent to IP.
Notes:
To configure the redirect Tel to IP table:
1.
Open the 'Redirect Number Tel > IP' page (Configuration tab > Protocol
Configuration menu > Manipulation Tables submenu > Redirect Number Tel > IP
page item).
Version 6.0
The Numbering Plan Indicator (NPI) assigned to this entry.
[0]
Unknown (default)
[9]
Private
[1]
E.164 Public
[-1] Not Configured = value received from PSTN/IP is used
Note: For a detailed list of the available NPI/TON values, refer to
''Numbering Plans and Type of Number''
•
You can also configure the Redirect Number Tel to IP table using the ini
file parameter RedirectNumberMapTel2Ip (refer to ''Number Manipulation
and Routing Parameters''
•
If the characteristics DestinationPrefix, RedirectPrefix, and/or
SourceAddress match the incoming SIP message, manipulation is
performed according to the configured manipulation rule.
•
The manipulation rules are executed in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight, Prefix2Add, and
then Suffix2Add.
•
The DestinationNumber and RedirectPrefix parameters are used before
any manipulation has been performed on them.
•
Redirect manipulation is performed only after the parameter
CopyDest2RedirectNumber.
Figure 3-89: Redirect Number Tel to IP Page
Description
on page
428
).
151
3. Web-Based Management
on page
155
March 2010