SIP User's Manual
3.3.5.13 Configuring the IPmedia Parameters
The 'IP Media Settings' page allows you to configure the IP media parameters. For a
description of these parameters, refer to ''Configuration Parameters Reference''
247
.
Note:
To configure the IP media parameters:
1.
Open the 'IP Media Settings' page (Configuration tab > Protocol Configuration
menu > IP Media submenu > IP Media Settings
2.
Configure the parameters as required.
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
Version 6.0
This page is applicable only to Mediant 1000. This page is Software Upgrade
Key dependant (refer to ''Upgrading the Software Upgrade Key''
202
).
Figure 3-106: IP Media Settings Page
button to save your changes.
page item).
Saving Configuration'' on page 199.
179
3. Web-Based Management
on page
on page
March 2010