Table 3-14: Ip Security Associations Table Configuration Parameters - AudioCodes Mediant 1000 User Manual

SIP User's Manual
4. Click Apply
5. To save the changes to flash memory, refer to ''

Table 3-14: IP Security Associations Table Configuration Parameters

Parameter Name
Operational Mode
[IPsecSATable_IPsecMode]
Remote Endopint
[IPsecSATable_RemoteEndpoint
AddressOrName]
Authentication Method
[IPsecSATable_AuthenticationMe
thod]
Shared Key
[IPsecSATable_SharedKey]
Source Port
[IPsecSATable_SourcePort]
Destination Port
[IPsecSATable_DestPort]
Version 6.0
; the rule is applied on-the-fly.
Defines the IPSec mode of operation.

[0] Transport (default)

[1] Tunneling
Defines the IP address or DNS host name of the peer.
Note: This parameter is applicable only if the Operational
Mode is set to Transport.
Selects the method used for peer authentication during IKE
main mode.

[0] Pre-shared Key (default)

[1] RSA Signature = in X.509 certificate
Note: For RSA-based authentication, both peers must be
provisioned with certificates signed by a common CA. For
more information on certificates refer to ''Server Certificate
Replacement''
Defines the pre-shared key (in textual format). Both peers
must use the same pre-shared key for the authentication
process to succeed.
Notes:

This parameter is applicable only if the Authentication
Method parameter is set to pre-shared key.

The pre-shared key forms the basis of IPSec security and
therefore, it should be handled with care (the same as
sensitive passwords). It is not recommended to use the
same pre-shared key for several connections.

Since the ini
secure network connection is recommended. Use a secure
transport such as HTTPS, or a direct crossed-cable
connection from a management PC.

After it is configured, the value of the pre-shared key
cannot be retrieved.
Defines the source port to which this configuration applies.
The default value is 0 (i.e., any port).
Defines the destination port to which this configuration applies.
The default value is 0 (i.e., any port).
97
3. Web-Based Management
Saving Configuration''
Description
on page 89 .
file is plain text, loading it to the device over a
on page 199 .
March 2010