Notes:
To load files using the Software Upgrade Wizard:
1.
Stop all traffic on the device using the Graceful Lock feature (refer to the warning
bulletin above).
2.
Open the 'Software Upgrade Wizard' (Management tab > Software Update menu >
Software Upgrade Wizard
3.
Click the Start Software Upgrade button; the 'Load a CMP file' Wizard page appears.
Note:
4.
Click the Browse button, navigate to the cmp file, and then click Send File; the cmp
file is loaded to the device and you're notified as to a successful loading.
SIP User's Manual
•
Before you can load an ini or any auxiliary file, you must first load a cmp
file.
•
When you activate the wizard, the rest of the Web interface is
unavailable. After the files are successfully loaded, access to the full Web
interface is restored.
•
If you upgraded your cmp and the "SW version mismatch" message
appears in the Syslog or Web interface, you know that your Software
Upgrade Key does not support the new cmp version. Contact
AudioCodes support for assistance.
•
You can schedule automatic loading of these files using HTTP/HTTPS,
FTP, or NFS (refer to the Product Reference Manual ).
); the 'Software Upgrade Wizard' page appears.
Figure 3-126: Start Software Upgrade Wizard Screen
At this stage, you can quit the Software Update Wizard, by clicking Cancel
, without requiring a device reset. However, once you start uploading a
cmp file, the process must be completed with a device reset.
206
Mediant 600 & Mediant 1000
Document #: LTRT-83306