Figure 3-91: Reasons For Alternative Routing - AudioCodes Mediant 1000 User Manual

SIP User's Manual
Notes:

To configure the reasons for alternative routing:
1. Open the 'Reasons for Alternative Routing' page (Configuration tab > Protocol
Configuration menu > Routing Tables submenu > Alternative Routing
2. In the 'IP to Tel Reasons' group, select up to four different call failure reasons that
invoke an alternative IP-to-Tel routing.
3. In the 'Tel to IP Reasons' group, select up to four different call failure reasons that
invoke an alternative Tel-to-IP routing.
4. Click the Submit
5. To save the changes to flash memory, refer to ''
Version 6.0
•
To enable alternative routing using the IP-to-Tel routing table, configure
the parameter RedundantRoutingMode to 1 (default).
•
The reasons for alternative routing for Tel-to-IP calls also apply for
Proxies (if the parameter RedundantRoutingMode is set to 2).
•
You can also configure alternative routing using the ini file table
parameters AltRouteCauseTel2IP and AltRouteCauseIP2Tel (refer to
''Number Manipulation and Routing Parameters''
Figure 3-91: Reasons for Alternative Routing Page
button to save your changes.
Saving Configuration''
157
3. Web-Based Management
on page 428 ).
page item).
on page 199
March 2010
.