Table 3-30: Inbound Ip Routing Table Description - AudioCodes Mediant 1000 User Manual

Voip sip media gateway
Hide thumbs Also See for Mediant 1000:
Table of Contents

Advertisement

SIP User's Manual
2.
From the 'Routing Index' drop-down list, select the range of entries that you want to
add.
3.
Configure the inbound IP routing rule according to the table below.
4.
Click the Submit
5.
To save the changes so they are available after a power failure, refer to ''
Configuration''
Parameter
IP to Tel Routing Mode
[RouteModeIP2Tel]
Dest. Host Prefix
[PstnPrefix_DestHostPrefix]
Source Host Prefix
[PstnPrefix_SrcHostPrefix]
Dest. Phone Prefix
[PstnPrefix_DestPrefix]
Source Phone Prefix
[PstnPrefix_SourcePrefix]
Version 6.0
button to save your changes.
on page
199
.

Table 3-30: inbound IP Routing Table Description

Determines whether to route the incoming IP calls before or after
manipulation of destination number (configured in ''
Number Manipulation Tables''
[0]
Route calls before manipulation = Incoming IP calls are
routed before the number manipulation rules are applied
(default).
[1]
Route calls after manipulation = Incoming IP calls are routed
after the number manipulation rules are applied.
The Request-URI host name prefix of the incoming SIP INVITE
message. If this routing rule is not required, leave the field empty.
Note:
The asterisk (*) wildcard can be used to depict any prefix.
The From URI host name prefix of the incoming SIP INVITE
message. If this routing rule is not required, leave the field empty.
Notes:
The asterisk (*) wildcard can be used to depict any prefix.
If the P-Asserted-Identity header is present in the incoming
INVITE message, then the value of this parameter is compared
to the P-Asserted-Identity URI host name (and not the From
header).
The called telephone number prefix.
The prefix can include up to 49 digits.
Note: The prefix can be a single digit or a range of digits. For
available notations, refer to ''Dialing Plan Notation for Routing and
Manipulation''
The calling telephone number prefix.
The prefix can include up to 49 digits.
Note: The prefix can be a single digit or a range of digits. For
available notations, refer to ''Dialing Plan Notation for Routing and
Manipulation''
Description
on page
on page
485
.
on page
485
.
165
3. Web-Based Management
Saving
Configuring the
143
).
March 2010

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 600

Table of Contents