3.3.2.3
Configuring the RTP/RTCP Settings
The 'RTP/RTCP Settings' page allows you to configure the Real-Time Transport Protocol
(RTP) and Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed
description of the parameters appearing on this page, refer to ''Configuration Parameters
Reference''
on page
To configure the RTP/RTCP parameters:
1.
Open the 'RTP/RTCP Settings' page (Configuration tab > Media Settings menu >
RTP / RTCP Settings
2.
Configure the parameters as required.
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
SIP User's Manual
247
.
page item).
Figure 3-48: RTP/RTCP Settings Page
button to save your changes.
74
Mediant 600 & Mediant 1000
Saving Configuration''
on page
Document #: LTRT-83306
199
.