Figure 3-127: End Process Wizard - AudioCodes Mediant 1000 User Manual

SIP User's Manual
5. Click one of the following buttons:
•
configuration and auxiliary files.
•
Note that as you progress by clicking Next
applicable Wizard page is highlighted in the file list on the left.
6. In the 'Load an
•
Click Browse, navigate to the ini file, and then click Send File; the ini file is
loaded to the device and you're notified as to a successful loading.
•
Use the ini file currently used by the device, by not selecting an ini file and by
ensuring that the 'Use existing configuration' check box is marked (default).
•
Return the device's configuration settings to factory defaults, by not selecting an
ini file and by clearing the 'Use existing configuration' check box.
7. You can now choose to either:
•
Click Reset; the device resets, utilizing the new cmp and ini file you loaded up to
now as well as utilizing the other auxiliary files.
•
Click Back; the 'Load a cmp file' page is opened again.
•
Click Next; the next page opens for loading the next consecutive auxiliary file
listed in the Wizard.
8. For loading the auxiliary files, follow the same procedure as for loading the ini
6).
9. In the 'FINISH' page, complete the upgrade process by clicking
'burns' the newly loaded files to flash memory and then resets the device. After the
device resets, the 'End Process' screen appears displaying the burned configuration
files (refer to the figure below).
10. Click End Process
appears.
11. Enter your login user name and password, and then click
informing you of the new cmp file.
12. Click OK ; the Web interface becomes active, reflecting the upgraded device.
Version 6.0
Reset; the device resets with the newly loaded cmp, utilizing the existing
Next; the 'Load an ini File' wizard page opens.
ini File' page, you can now choose to either:
Figure 3-127: End Process Wizard Page
to close the wizard; the 'Enter Network Password' dialog box
, the relevant file name corresponding to the
207
3. Web-Based Management
file (Step
Reset; the device
OK ; a message box appears
March 2010