Table of Contents
Advertisement
CDM-800 Gateway Router
Ethernet Management
IP – Entry IP Address, format XXX.XXX.XXX.XXX.
MAC – Entry MAC Address, format YY:YY:YY:YY:YY.
Type (read-only) – Entry Type is identifiable as Static or Dynamic and cannot be edited.
Click [Submit Changes] once the desired edits have been made in this section.
5.4.4.4.4
Configuration | Routing (Routes)
By using the 'Configuration | Routing (Routes)' page (Figure 5-12) static routes can be entered
to route IP traffic over the satellite or to another device on the local LAN.
Add New Route
This section allows the user to directly add a route entry using text boxes and drop-down menus
as described previously for the Route Table (Edit) section.
Click [Add Entry] once all settings have been created in this section. Note that, when a new
route is added, the index automatically increments to the next available number.
Delete Route
Enter Route Index to Delete, then click [Delete Entry] once all changes have been made to this
section. The specified route entry will then be deleted from the route table.
Figure 5-12. Configuration | Routing (Routes) page
5–17
Revision 0
MN-CDM800
Advertisement
Table of Contents
