B.5.1 Unit Parameter Commands And Queries - Comtech EF Data CDM-800 Installation And Operation Manual

CDM-800 Gateway Router
Appendix B
B.5.1 Unit Parameter Commands and Queries
Command
Parameter Number of
(Instruction
Type Arguments
& Qualifier)
Default DPW= N/A
Passwords
GE1 Address IG1= 18 bytes
numerical
GE2 Address IG2= 18 bytes
numerical
Description of Arguments
Command Only.
Resets the admin username/password to:
Username = "comtech"
Password = "comtech"
Command or Query.
Sets the IP Address and network prefix for the 10/100/1000 BaseT GE1
Ethernet port, in the form aaa.bbb.ccc.ddd/yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Other restrictions:
If aaa>191, prefix may not be less than 24.
If aaa>127, prefix may not be less than 16.
Example: IG1=010.006.030.001/24
Command or Query.
Sets the IP Address and network prefix for the 10/100/1000 BaseT GE2
Ethernet port, in the form aaa.bbb.ccc.ddd/yy, where:
(Permitted ranges – cannot all be zero)
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255
yy = network prefix (range: 8 to 31)
Other restrictions:
If aaa>191, prefix may not be less than 24.
If aaa>127, prefix may not be less than 16.
Example: IG2=010.006.030.001/24
B–6
Query
Response to
(Instruction Response to Query
Command
& Qualifier)
DPW= N/A N/A
DPW?
DPW*
DPW#
IG1= IG1? IG1=xxx.xxx.xxx.xxx/yy
IG1? (see Description of
IG1* Arguments)
IG1#
IG2= IG2? IG2=xxx.xxx.xxx.xxx/yy
IG2? (see Description of
IG2* Arguments)
IG2#
Revision 0
MN-CDM800